Butt Fusion Welding Machine SHY160
Thismachine is designed for butt welding of pipe-to-pipe and pipe-to-fitting of PEPP PVDF and other thermo-plastic materials.It can work in trenches,worksite andworkshop,and it is an ideal joining equipment for water and gas supplypipelines.
1.Detaching device isespecially designed to break off melted pipes end from the heating plate on theexpiry of heating up.
2. Safety switch enables thetrimmer to start only when it is located in the operation position.
3.A mechanical lock excludesthe disengagement of the trimmer during the operation
4. Removable heating plate withDuPont high quality non-stick PTFE coating, and also equipped with digitaltemperature controller
5. Low temperature differencein heating plate surface, within 7 degree
6. Incorporated with large easyto read scale pressure gauge, accumulator, pressure regulation valve, swingcheck valve, high pressure hoses, and quick couplers
7. Imported oil seal &quick couplers
8. Fine operation panel withclearly strong meshing printing characters.
Model | SHY160 |
Welding range | 63-~160mm |
Power supply | 220V±10%, 50Hz |
Overall cylinder section | 7.6cm2 |
Max. Pressure | 6MPa |
Total power | 2.45KW |
Heating plate power | 1.0KW |
Trimmer motor power | 0.7KW |
Hydarulic unti motor | 0.75KW |
Heating plate Max. Temp. | 270℃ |
Heating plate temperature difference | ±5℃ |
Manufacture standards | ISO12176-1 |
Overall Weight (kg) | 108KG |